Phone

0857 4065 2657 (Mashudy)

0823 1173 8960 (Fajar)

Phone Office

+62-21 29563045







30% CO2 + RH/T Data Logger

30% CO2 + RH/T Data Logger



Order Catalog

Description

CM-0019
CM-0213

The 30% CO2 + RH/T Data Logger measures up to 30% (300,000ppm) carbon dioxide, temperature, and relative humidity levels in ambient air. It “wakes up”, take a reading, stores it in memory, and goes back to sleep until the next reading is required.

The Bio-Logger is not designed for real-time data acquisition. Instead, it logs CO2 + RH/T with a date and time stamp into for downloading later. The logging interval is programmable from 30 seconds to 10 days. Up to 60,000 data points with time stamps can be stored in built-in, non-volatile memory. This means that your data is not lost even if the batteries are completely discharged.

The logger uses a built-in, rechargeable Lithium Ion battery. Taking one reading every 30 minutes, the 2,200mA model will record for approximately 2 months, while the 3,600mA model can continue for over 3 months.


Spesification


CO2 Measurement: non-dispersive infrared (NDIR)
Measurement Range: 0 – 300,000 ppm (0-30%)
Accuracy: ± 0.5 %vol. CO2 ± 3 % of measured value
Sampling Method: diffusion
Data logging: 30 seconds to 10 days sample interval
Memory: 60,000 log entries maximum, includes time stamp, CO2, Temp, %RH
Battery endurance 8000 measurement before recharge.
Sensor Life Expectancy: > 10 years
Maintenance Interval: No maintenance required
Size: 5.75×5.6×1.3in (146×91×33mm)

Power
Rechargeable Lithium Ion Battery Pack (2,200mA or 3,600mA)
USB Cable or Wall Adapter for charging/long-term operation

Included Accessories
120/220 VAC adapter
International Wall adapter kit
USB Cable

System Requirements
Windows XP SP2 or newer
Microsoft .Net 3.5 Run time Libraries

Warranty
1 Year