Phone

0857 4065 2657 (Mashudy)

0823 1173 8960 (Fajar)

Phone Office

+62-21 29563045







8600 Series Dataloggers

8600 Series Dataloggers



Order Catalog

Description

The Model 8600 Series Dataloggers are designed around the Campbell Scientific, Inc. (CSI) Model CR6 Measurement and Control System. Although primarily manufactured for use with vibrating wire sensors and thermistors, the Model 8600 Series can be configured, at Geokon’s factory, to read MEMS sensors, Carlson type sensors, voltage type sensors, 4-20 ma sensors, and numerous other specialty sensor types. The Model 8600-1 and 8600-2 Dataloggers are housed in a NEMA 4X fiberglass reinforced polyester enclosure, designed for use in harsh environments with wide temperature tolerance, resistance to moisture and humidity and protection against lightning damage. The Model 8600-3 Datalogger is housed in a rugged, water-resistant PVC enclosure (stainless steel and fully waterproof enclosures are also available) together with a battery pack (for unattended operation) and an integral Spread Spectrum Radio (for wireless data transmission).


Feature

Accuracy ±(0.04% of reading + 2 microvolts), 0-40°C (analog);
±0.013% of reading (vibrating wire)

Resolution 50 nV (±200 mV range, differential measurement,
input reversal, 5 Hz fN1) (analog);
0.001 Hz RMS (frequency)

Temperature Range −40°C to +70°C

Battery 8600-1/2 | 12 V, 7 Ah Gel Cell
8600-3 | 4 × D-cell (Li 8.5 Ah)

L × W × H¹ 8600-1 | 392 × 352 × 161 mm
8600-2 | 502 × 461 × 263 mm