PEL103 Power and Energy Data Logger w/ LCD Display

PEL103 Power and Energy Data Logger w/ LCD Display



  • Power (VA, W, var) & Energy (VAh, Wh, varh) Measurements on 50/60Hz, 400Hz and DC Systems
  • Measurement Range of 100mA to 10,000 Amps with MiniFlex Current Sensors (Included)
  • 4 Line LCD Display Shows 3 Phases Simultaneously on a Bright Blue Monochrome Backlit
  • Store Measured Current and Voltage Readings onto SD(HC) Cards up to 32 GB
  • RMS and DC Measurements of each Phase at 128 Samples per Cycle
  • Bluetooth, USB and Ethernet LAN Communications Options for Setup and Configuration
  • New! Android App to Connect, Configure, Setup, View Data Using Bluetooth or WiFi Communications


Includes Tool Bag, (3) MiniFlex Current Sensors, USB Cable, (4) Black Test Leads w/ Alligator Clips, AC Power Adapter, (12) Color-Coded ID Markers, Multifix Mounting System, Safety Card, 2 GB SD Card and USB-SD Card Reader, USB Memory Stick with User Manual and DataView PC Software


Input Channels(3) Current Inputs via Custom 4 pin Jacks
(3) Voltage Inputs via 4mm Safety Banana JacksVoltage
50/60 Hz: 42.5 Hz to 69 Hz @ ±0.1 Hz
400 Hz: 340 Hz to 460 Hz
DC: 100 to 1000 VDC @ ±1% Reading ± 3 Volts (0.1V Resolution)50/60Hz Voltage
(Single-Phase RMS)
Measurement Range: 100 to 1000 rms
Accuracy: ±0.2% of Reading ±0.2 Volts
Resolution: 0.1 Volts50/60Hz Voltage
(Phase to Phase RMS)
Measurement Range: 100 to 2000 Vrms
Accuracy: ±0.2% of Reading ±0.4 Volts
Resolution: 0.1 Volts to 1.0 Volt400Hz Voltage
(Single-Phase RMS)
Measurement Range: 100 to 600 Vrms
Accuracy: ±1% of Reading ± 1 Volt
Resolution: 0.1 Volt400Hz Voltage
(Phase to Phase RMS)
Measurement Range: 200 to 1200 Vrms
Accuracy: ±1% of Reading ±1 Volt
Resolution: 0.1 Volts to 1.0 VoltDC Voltage
(PT Ratios)
Range: 50 Volts to 65,000 Volts (Programmable)
Resolution: 0.01 Volts to 0.1 VoltsCurrentSensor Type: MiniFlex Sensor Probe (#MA-193)
100mA - 100Arms: ±1% ±50mA @ 1-100mA Resolution
20A - 400Arms: ±1% ±0.2A @ 10 to 100mA Resolution
100A - 2000Arms: ±1% ±1A @ 0.1 to 1A Resolution
500A - 10,000Arms: ±1% @ 0.1 to 1A Resolution
CT Ratios: Programmable 1:1 to 25,000:1 (Probe Dependent)Active PowerMeasurement Range: -2 to 2GW
Accuracy: ±0.5% of Reading ±0.005% Pnom
Resolution: 0.001WReactive PowerMeasurement Range: -2 to 2Gvar
Accuracy: ±1% of Reading ±0.01% Qnom
Resolution: 0.001varApparent PowerMeasurement Range: 0 to 2GVA
Accuracy: ±0.5% of Reading ±0.005% Snom
Resolution: 0.001VAPower FactorMeasurement Range: -1 to 1
Accuracy: ±0.05
Resolution: 0.001Tangent (active/reactive power ratio) Measurement Range: -3.2 to 3.2
Accuracy: ±0.02
Resolution: 0.001Active Energy Measurement Range: 0 to 4 x 1018
Accuracy: ±0.5% of Reading
Resolution: 1WhReactive Energy Measurement Range: 0 to 4 x 1018
Accuracy: ±2% of Reading
Resolution: 1varhApparent Energy Measurement Range: 0 to 4 x 1018
Accuracy: ±0.5% of Reading
Resolution: 1VahTotal Harmonic Distortion (THD)±655%Individual Harmonics 1 to 50 Displayed in Percentage; 1 to 7 at 400HzSampling Frequency50/60 Hz: 128 Samples per Cycle
400 Hz: 16 Samples per cycleData Storage Rate1 per SecondDemand Period Storage Rate1, 2, 3, 4, 5, 6, 10, 12, 15, 20,30 and 60 Minutes (User Selectable)Recorded Parameters V, I, W, VA, var, PF, Tan, Wh, Vah, varh, THD (V and I), Individual Harmonics (1 to 50 per Phase), Crest Factor (CF), Cos f / DPFEvent LogTracks and Records Status Changes and Error Messages Along with Recorded DataLED IndicatorsBluetooth Active, Recording Status, Phase Connection Reversal, Overload, Battery Status, and SD Card StatusData Storage Capacity2GB SD Card (Included)
NOTE: SD Cards (up to 2 GB); SDHC Cards (4 to 32 GB) Formatted FAT32 are Supported Communication Ports USB 2.0, Ethernet (RJ45), Wireless Bluetooth Class 1
NOTE: Class II Bluetooth Range is Restricted to 40 ft.
Computers without Bluetooth will require a Bluetooth Radio Adapter
Display Type: 4 Line Monochrome Backlit LCD w/ Adjustable Brightness and Contrast
Dimensions: 67mm x 55mm (2.63" x 2.16")
NOTE: Display Available with PEL103 Version OnlyPower SourceRechargeable 8.4 Volt NiMH Battery Pack
(5 Hour Charge Time)Battery Life
NOTE: Battery Life Depends on Measurement Environment, Recording Interval and Battery PerformanceCaseDouble Insulated, Rubber Over Molded, Polycarbonate
UL94 V1 Rated / IP54 (Non Operating)MountingEmbedded Magnets on Back Side, Keyhole Slot on Back SideSecurityKensington Anti-theft SystemSoftwareDataView Software (Included)OS CompatibilityWindows XP, Vista and 7 (32-bit and 64-bit)Operating EnvironmentTemperature: 0°C to 50°C (32°F to 122°F)
Humidity: 0 to 85% RHStandards Compliance IEC 61010-1:Ed3 IEC61010-2-030:Ed1 for 1000 Volt CAT III / 600 Volt CAT IV; Polution Degree 2; CEWeightDimensions256mm x 125mm x 37mm (10.08" x 4.92" x 1.46")