Phone

0823 1173 8960 (Fajar)

0857 4065 2657 (Mashudy)

Phone Office

+62-21 29563045







Telaire 7001 Carbon Dioxide (CO2) Monitor

Telaire 7001 Carbon Dioxide (CO2) Monitor



Inquiry

Description

CO2 and Temperature Monitor


Feature

  • Monitor Carbon Dioxide and Temperature Readings
  • Provides a 0 to 4 Volt Output
  • 0 to 10,000 ppm Carbon Dioxide Measurement on Display
  • 0-4,000 ppm Carbon Dioxide Measurement Output
  • Large LCD Display with Push Button Interface

Spesification

Performance CO2 Channel
Measurement Range 0-4,000 ppm Voltage Output
0-10,000 ppm Display
Pressure Dependence 0.13% of reading per mm Hg
(Corrected via user input for elevation)
Sensitivity ± 1 ppm
Repeatability ± 20 ppm
Temperature Dependence ± 0.1% of reading per ° or ± 2 ppm per °
whichever is greater, referenced to 25°
Accuracy ± 50 ppm or 5% of reading, whichever is greater
Annual Drift ± 20 ppm typical
Response Time < 60 seconds for 90% of step change
Warm-Up Time < 60 seconds at 22°C
Operating Conditions Temperature:32°F to 122°F (0° to 50°C)
Humidity: 0-95% RH, Non-Condensing
Storage Temperatures -40°F to 140°F (-40°C to 60°C)
Calibration Interval 12 months, offset adjustment using single gas at 0-1000 ppm CO2. Factory calibration available
Temperature Channel
Temperature Range Voltage Output: 32°F to 104°F (0°C to 40°C)
Display: 32°F to 122°F (0°C to 50°C)
Display Resolution 0.1°F (0.1°C)
Display Options °F, °C, or Off. Set with Panel Button
Accuracy ± 2°F (± 1°C)
Response Time 20-30 minutes
(Case must Equilibrate with Environment)
Calibration Interval 12 months, offset adjustment using temperature standard at 50°F to 86°F (10°C to 30°C).
Full factory calibration available
Other Specifications
Method Dual Beam Absorption Infrared™
Sample Method Diffusion or flow through (50 - 100 ml/min)
Warranty 18 months parts and labor
Output
Analog CO2: 0-4 VDC, 1mV/ppm (4,000 ppm max)
Temperature: 0-4 VDC linear, 32°F to 104°F (0°C to 40°C)
Output Impedance 100 Ohms
Wiring Connection Via RJ-45 to DB9 Serial Port Cable
Display LCD with independent CO2/ temp readings (panel buttons set elevation, °F/°C, calibration functions)
Power Supply
Battery Type Four AA Alkaline Batteries (Not Included)
Battery Operation 80 Hours (alkaline)
External 6 VDC from external AC/DC adapter (included)
Power Requirements 100 mA Peak, 20 mA average from 6V Certification