Xlite 9210B – with Enclosure

Xlite 9210B – with Enclosure



Order

Description

Xlite 9210B – with Enclosure

Designed for maximum value and functionality, the XLite 9210B is a high performance data recorder and communications device ideal for remote real-time data acquisition, control, and communications. The XLite 9210B datalogger has the ability to simultaneously take measurements and transmit information for a wide range of applications. These versions include a weatherproof enclosure. For models without an enclosure.


Feature

  • Support for SD or USB memory
  • 32MB Internal Flash Memory
  • 32-Bit Processor
  • Multiple Communications Simultaneously
  • Sensors connect to the system via analog and digital I/O modules that plug into the I2C port as well as via RS232, RS485, and SDI-12.
  • 4 communications serial ports for satellite transmitters, modems, radios & other serial communication devices.
  • Retrieve data using any communication interface, USB or SD memory cards.
  • Wide Operating Temperature (-40 to +60°C)
  • Built-In Ethernet
  • Built-in Display/Buttons for viewing data
  • Built-in 10 channel A/D, 8 channel DIO

Spesification

  • Measurement Interval :
1.0 Seconds to 24 hours (Programmable)
  • Number of Measurements Supported :
Unlimited
  • Analog Channels :
10
  • Input Voltage Common mode voltage :
-0.1 to 5V with respect to ground, single ended or differential
  • Range :
 
  •           Single-Ended :
0-5 V, ± 78 mV (with respect to ground)
  •           Differential :
±2.5V, ± 78 mV ( + input with respect to – input)
  • Accuracy :
0.002% of 5V typ 0.003% of 78mV typ
  • Resolution :
16 bit
  • Expandable :
via I2C and SDI-12
  • Resolution :
16 bit
  • Digital Inputs and Outputs :
8 (6 Bi-Directional, 2 input only)
  • Functions Supported :
Status inputs, counter inputs, frequency inputs, quadrature inputs
  • Max Frequency :
Channel 1, 8KHz; other channels 1KHz
  • Support for Low Level AC inputs :
Channels 7 and 8 support low level AC frequencies (e.g. RMYoung)
  • Output Type :
Open collector with 100 ohm current limiting resistor, 100 mA max, 15V max
  • Expandable :
via I2C and SDI-12
  • Excitation Channels :
5 Channels
  • Type(s):
Precision Voltage Reference, Switched battery, Switched +5, Protected +12V, Protected +5V
  • Communication Ports:
4 RS232 for communications
  • Telemetry :
Satlink2, Sutron Data & Voice Modem, Radio, Direct Connect, GPRS, IRIDIUM, MODBUS, and custom devices via BASIC
  • Number of Simultaneous Communications :
4
  • Operating Temperature :
-40°C to +60°C
  • Display Operating Temperature :
LCD operates to -20°C
  • Display Type :
2×20 character sunlight-readable backlit LCD
  • Keypad Type :
3 buttons
  • Memory Built-In :
Non-volatile memory: 65MB (1 to 3 million readings), RAM: 32 MB
  • SD/MMC Card :
For download data and read/write setups or additional log memory
  • Ethernet :
Built in Ethernet support
  • Clock Accuracy (at 0C – 40°C) :
5.4 sec/month (at 0?C – 40?C)
  • Power Requirements :
10-16VDC (20VDC max)
  • Current Drain :
Typically 3mA standby, 40mA active
  • Communication Protocols Supported :
SSP (Sutron Standard Protocol), MODBUS, MODEM, Telnet, HTTP, FTP, DHCP, DNS, SLIP, PPP, and custom protocols via Basic using RS-232, TCP, and UDP
  • Programming :
Menu driven setup, Expanded complexity via BASIC, Custom capability via C++
  • Device Dimensions :
  •           Height :
16 in. (40.7 cm)
  •           Length :
14 in. (35.6 cm)
  •            Width :
8 in. (20.4 cm)
  •           Weight :
15.3 lbs. (7 kg)
  • Notes :
* Please refer to the 9210 User Manual for full product specifications and variations