Description
Gauge Pressure Sensor -0125-50 Highly accurate solid state pressure transducer measures air/dry gas pressures from 0 to 50 psi with a maximum pressure of 100 psi.
Feature
- Mercury manometer replacement
- Pressure activated control applications
- Ideal for remote monitoring applications
- Supports SDI-12
- With 5600-0126 chart drive, the Accubar can drive chain or tape driven devices including chart recorders.
- Quadrature output connects to data recorders.
- Durable aluminum case
- DB-9 female connector, for RS-232
- 8 position terminal block
- Fitting for a 1/8 in.OD tubing
- Low power consumption
- Low maintenance requirement
Spesification
|
0 to 50 psi; 0 to 115 feet (35 m) of water |
|
-40°C to +60°C |
|
0.5g @ 10-50 Hz |
|
100 psi |
|
ft of H20, cm of H20, psi, kPa, user specified |
|
0.0001 psi (0.0001 ft of water) |
|
0.05% FSO (-40°C to +60°C) Including any linearity, pressure hysteresis & temperature errors |
|
Power Supply to 28 VDC (reverse polarity protected) |
Power Consumption | |
---|---|
|
17 mA typ |
|
6 mA typ |
|
0.2 mA typ |
|
18 mA typ |
|
9 mA typ |
|
8 mA typ |
Power specifications under no-load conditions | |
Output | |
|
RS-232, SDI-12, quadrature |
|
RS-232, SDI-12, quadrature, Analog 0-5VDC |
|
Continuous or on demand |
|
1200 baud |
|
0 to 240 seconds (user selectable) |
|
Fitting for 1/8 in. OD tubing |
|
5 in. x 4.5 in. x 2.25 in. excluding connectors |
|
1.5 lbs |
|
8 position terminal block and DB-9 |
|
Air or dry gas |